S&W Model 610

gerhard1

Well-known member
Silver Member
Joined
Jul 27, 2025
Messages
101
A C&P of a post I made on the Oklahoma Forum
www.imfdb.org_images_8_8e_S_26W_Model_610_Revolver.jpg



The S&W model 610, pictured above in a 6" barrel, is a six-shot stainless steel N-frame chambered in 10mm Automatic. Because the 10mm is a rimless round, like the 45 ACP, moon clips are needed to extract the rounds. It is a heavy gun and was made from 1990 to 1992, and briefly once more starting in 1998. Mine, a 5" barrel, is one of the earlier specimens, and I have had it for almost 30 years.

Loading the moon clips was a big pain in the butt, which is one reason that I have not shot this gun for at least eight years. I don't remember shooting it since I moved to Oklahoma.and that was in 20008. Yesterday, I took delivery of a device that makes loading the clips much easier. It is the BMT Equipped loader. I already had one for my S&W models 625 and 22. If I can find it, I'll post a link to the thread.

This morning, I put 12 rounds through it and then a combination of the cold and the fact that I had no protection on my finger made me stop. Then after I went to town and got lunch and a few groceries I put a bandaid on my finger to pad it and put 60 more downrange. The reason for the bandaid was because the trigger's edge was quite sharp and the recoil would form a very nice blister .

Recoil was heavy, although not really excessive., The aftermarket Pachmayr grips I put on it really helped here, although I feel that this is one gun where Hogue Monogrips would help. Of the 72 rounds I shot today, all but six were RAM 155 grain JHP. The remaining six were Hornady 180 grain FMJ.

Accuracy in my hands was very acceptable and all shots were rapid DA at very close range. The action's being very smooth here helped a great deal.

Now, is this gun suitable for concealed carry? Unless you're a fairly big guy like me, I'd have to say 'no'. It is very good for hunting, home defense, target shooting and general plinking, but it is a huge, heavy gun. Please note the full-length underlug in the picture above. That, plus the fact that there is less metal removed means more weight, which is very noticeable.

But I had fun today.
 
I have very recently been searching for 10mm wheelie options, again.

The 610 has always been on the radar, but, i found out SW came out with a 310 without me knowing anything about it. Scandium and stainless 6 shot 10mm. When i saw scandium, I was genuinely hoping it wouldnt weigh alot. And all that hope was meaningless, because they tip the scale at 28oz.

They also seem to be unobtainum.

I see that my best bet to find exactly what i want, still means reaming 40cal chambers to make a 10mm j frame.
 
I was in the Olathe Gun shop a year ago and they had one on the shelf. I was tempted to buy it so I would have a cool way to shoot .40 S&W, but didn't feel like spending the money.
 
I have very recently been searching for 10mm wheelie options, again.

The 610 has always been on the radar, but, i found out SW came out with a 310 without me knowing anything about it. Scandium and stainless 6 shot 10mm. When i saw scandium, I was genuinely hoping it wouldnt weigh alot. And all that hope was meaningless, because they tip the scale at 28oz.

They also seem to be unobtainum.

I see that my best bet to find exactly what i want, still means reaming 40cal chambers to make a 10mm j frame.
I'm an avid 10mm collector, but not a big wheel gun guy. I do have a 610 though, just because I guess. I had a Ruger Buckeye at one time too. Anyway, I haven't specifically looked for the 310, but they do go across Gunbroker.com occasionally if you keep your eyes open. They'll bring a pretty penny as one would imagine for a rare gun. I've bought a lot of my rare 10mm's that way though. I set up search notifications so that it would let me know when something popped up. I've bought a pair of S&W 1046's (150 made), and a bunch of the early DW Razorback's 1 of 150 series. Those don't hold any particular extra value, other than to me because I was around and involved during the time when Bob Serva was polling the forums while he was president of Dan Wesson and they were considering making a 1911 10mm and users got a lot of input on it, some semi-custom features, etc.
 
Back
Top